HIKVISION IP Dome DS-2CD1143GO-I
Key features
- Resolution: 4 MP (2560 x 1440)
- 2.8 mm / 100° lens
- H.265+/H.265/H.264+/H.264/MJPEG video compression
- 3D-DNR, DWDR, BLC video processing functions
- Access via Hik-Connect app
- Region of interest (ROI)
- Mechanically switching IR filter
- IK10 rating (vandal-proof)
- IP67 rating
- Power: 12 VDC or PoE (802.3af)
The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).
Specifications
| Name | HIKVISION DS-2CD1143G0-I |
| Code | K17266 |
| Video system | IP |
| Housing type | Ceiling (dome) |
| Direction adjustment | 2-axis |
| Image sensor | 1/3″ Progressive Scan CMOS |
| Sensitivity | 0.028 lx @ (F2.0, AGC ON), 0 lx in IR mode |
| Lens | 2.8 mm @ F2.0 / 100o |
| Resolution | 2560 x 1440 pixels |
| Frame rate | 20 fps at 2560 x 1440, 25 fps at lower res. |
| Compression | H.265+/H.265/H.264+/H.264/MJPEG |
| Number of video streams | 2 |
| Bit rate range | 32 kbps – 8 Mbps |
| IR range | Up to 30 m |
| Video processing | 3D-DNR, DWDR, BLC |
| Mechanically switching IR filter | Yes |
| Gain | Automatic/Preset |
| Alarm events | Motion detection, video tampering |
| Intelligent image analysis | Not implemented |
| Corridor mode | Yes |
| ROI | 1 region |
| ANR | No |
| Recording | NAS (NFS/SMB/CIFS), FTP (screenshots) |
| Network interface | RJ-45 10/100Base-T |
| Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Supported standards | ONVIF (S, G profiles), ISAPI |
| Housing material | Metal, plastics |
| IP and IK ratings | IP67, IK10 |
| Power | 12 VDC ± 25% PoE IEEE 802.3af |
| Power consumption | Max. 5 W |
| Operating temperature range | -30°C …+60°C |
| Dimensions | Φ111 × 82 mm |
| Weight | 0.57 kg |
Product series
The camera belongs to a new EasyIP Lite series characterized by high performance and affordable price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).
HIKVISION IP Dome DS-2CD1143GO-I
Key features
- Resolution: 4 MP (2560 x 1440)
- 2.8 mm / 100° lens
- H.265+/H.265/H.264+/H.264/MJPEG video compression
- 3D-DNR, DWDR, BLC video processing functions
- Access via Hik-Connect app
- Region of interest (ROI)
- Mechanically switching IR filter
- IK10 rating (vandal-proof)
- IP67 rating
- Power: 12 VDC or PoE (802.3af)
The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).
Specifications
| Name | HIKVISION DS-2CD1143G0-I |
| Code | K17266 |
| Video system | IP |
| Housing type | Ceiling (dome) |
| Direction adjustment | 2-axis |
| Image sensor | 1/3″ Progressive Scan CMOS |
| Sensitivity | 0.028 lx @ (F2.0, AGC ON), 0 lx in IR mode |
| Lens | 2.8 mm @ F2.0 / 100o |
| Resolution | 2560 x 1440 pixels |
| Frame rate | 20 fps at 2560 x 1440, 25 fps at lower res. |
| Compression | H.265+/H.265/H.264+/H.264/MJPEG |
| Number of video streams | 2 |
| Bit rate range | 32 kbps – 8 Mbps |
| IR range | Up to 30 m |
| Video processing | 3D-DNR, DWDR, BLC |
| Mechanically switching IR filter | Yes |
| Gain | Automatic/Preset |
| Alarm events | Motion detection, video tampering |
| Intelligent image analysis | Not implemented |
| Corridor mode | Yes |
| ROI | 1 region |
| ANR | No |
| Recording | NAS (NFS/SMB/CIFS), FTP (screenshots) |
| Network interface | RJ-45 10/100Base-T |
| Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Supported standards | ONVIF (S, G profiles), ISAPI |
| Housing material | Metal, plastics |
| IP and IK ratings | IP67, IK10 |
| Power | 12 VDC ± 25% PoE IEEE 802.3af |
| Power consumption | Max. 5 W |
| Operating temperature range | -30°C …+60°C |
| Dimensions | Φ111 × 82 mm |
| Weight | 0.57 kg |
Product series
The camera belongs to a new EasyIP Lite series characterized by high performance and affordable price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).
(Visited 742 times, 1 visits today)