HIKVISION IP Dome DS-2CD1143GO-I

HIKVISION IP Dome DS-2CD1143GO-I Image
Key features
  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)
The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).
Specifications
Name HIKVISION DS-2CD1143G0-I
Code K17266
Video system IP
Housing type Ceiling (dome)
Direction adjustment 2-axis
Image sensor 1/3″ Progressive Scan CMOS
Sensitivity 0.028 lx @ (F2.0, AGC ON),
0 lx in IR mode
Lens 2.8 mm @ F2.0 / 100o
Resolution 2560 x 1440 pixels
Frame rate 20 fps at 2560 x 1440,
25 fps at lower res.
Compression H.265+/H.265/H.264+/H.264/MJPEG
Number of video streams 2
Bit rate range 32 kbps – 8 Mbps
IR range Up to 30 m
Video processing 3D-DNR, DWDR, BLC
Mechanically switching IR filter  Yes
Gain Automatic/Preset
Alarm events Motion detection, video tampering
Intelligent image analysis Not implemented
Corridor mode Yes
ROI 1 region
ANR  No
Recording NAS (NFS/SMB/CIFS), FTP (screenshots)
Network interface RJ-45 10/100Base-T
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Supported standards ONVIF (S, G profiles), ISAPI
Housing material  Metal, plastics
IP and IK ratings  IP67, IK10
Power 12 VDC ± 25%
PoE IEEE 802.3af
Power consumption Max. 5 W
Operating temperature range -30°C …+60°C
Dimensions Φ111 × 82 mm
Weight 0.57 kg
Product series
The camera belongs to a new EasyIP Lite series characterized by high performance and affordable price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).

HIKVISION IP Dome DS-2CD1143GO-I

HIKVISION IP Dome DS-2CD1143GO-I Image
Key features
  • Resolution: 4 MP (2560 x 1440)
  • 2.8 mm / 100° lens
  • H.265+/H.265/H.264+/H.264/MJPEG video compression
  • 3D-DNR, DWDR, BLC video processing functions
  • Access via Hik-Connect app
  • Region of interest (ROI)
  • Mechanically switching IR filter
  • IK10 rating (vandal-proof)
  • IP67 rating
  • Power: 12 VDC or PoE (802.3af)
The DS-2CD1143G0-I camera is dedicated for IP CCTV systems. The ceiling camera has been equipped with 4 MP 1/3″ CMOS sensor providing good video coverage even in low-light conditions. Along with IR illuminator with range up to 30 m, the camera can also operate in complete darkness. The built-in 2.8 mm lens has 100° viewing angle. The IP67-rated housing of the camera protects the electronics against adverse weather conditions. The camera can be powered conventionally from a 12 VDC source or with the use of PoE option (802.3af).
Specifications
Name HIKVISION DS-2CD1143G0-I
Code K17266
Video system IP
Housing type Ceiling (dome)
Direction adjustment 2-axis
Image sensor 1/3″ Progressive Scan CMOS
Sensitivity 0.028 lx @ (F2.0, AGC ON),
0 lx in IR mode
Lens 2.8 mm @ F2.0 / 100o
Resolution 2560 x 1440 pixels
Frame rate 20 fps at 2560 x 1440,
25 fps at lower res.
Compression H.265+/H.265/H.264+/H.264/MJPEG
Number of video streams 2
Bit rate range 32 kbps – 8 Mbps
IR range Up to 30 m
Video processing 3D-DNR, DWDR, BLC
Mechanically switching IR filter  Yes
Gain Automatic/Preset
Alarm events Motion detection, video tampering
Intelligent image analysis Not implemented
Corridor mode Yes
ROI 1 region
ANR  No
Recording NAS (NFS/SMB/CIFS), FTP (screenshots)
Network interface RJ-45 10/100Base-T
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Supported standards ONVIF (S, G profiles), ISAPI
Housing material  Metal, plastics
IP and IK ratings  IP67, IK10
Power 12 VDC ± 25%
PoE IEEE 802.3af
Power consumption Max. 5 W
Operating temperature range -30°C …+60°C
Dimensions Φ111 × 82 mm
Weight 0.57 kg
Product series
The camera belongs to a new EasyIP Lite series characterized by high performance and affordable price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).
(Visited 634 times, 1 visits today)